FOCUS Enhancements MANL102306 - Manual (Page 43)

Quickstart
FS­100 Portable DTE Recorder 25
Set Time and Date
Step 1: Press the Right navigation button several times until the Setup
display appears on the screen as shown below:
Step 2: Use the Down navigation button to highlight the date and press
the Right navigation button to access the Set Date screen.
Step 3: Use the Up and Down navigation buttons to change the
highlighted value. Use the Right and Left navigation buttons to
highlight the Month, Day, and Year.
Step 4: When complete, press the right­most Function button indicated
as
BACK on the screen. The new date will be indicated on the
Setup Screen.
Date and Time Must Be Set
The date and time must be set because they are used in the FS­100 file
naming function.
SETUP
09 / 15 / 05
11 : 21 : 13
V 1 . 0. 0
­LCDLIGHT ON
SET DATE
09 / 15 / 05
MM / DD / YY
BACK