FUJITSU MAV2036RC - Manual (Page 71)

6.2 Maintenance Information
C141-E219 6-9
6.2.6 Tests
This disk drive can be tested in the following ways:
• Initial seek operation check (See Subsection 6.3.1)
• Operation test (See Subsection 6.3.2)
• Diagnostic test (See Subsection 6.3.3)
Figure 6.3 shows the flow of these tests.
Test results OK?
Start
Execute an operation
test using a host
computer or test
equipment
Yes
No
Yes
No
Start self-test by
turning the power on
Test results OK?
Continue operation
Check host system
(Table 6.2)
Host system
normal? Analyze system-related
error
Replaced or repair
disk drive
Disk drive
normal?
Execute diagnostic
test using a host
computer or test
equipment
Test results OK?
Test using voltage or
temperature stress
Test results OK?
Normal
Analyze disk drive
error (Table 6.3)
Yes
Yes
No
No
Yes
No
Yes
No
Figure 6.3 Test flowchart