FUJITSU MAV2036RC - Manual (Page 25)

2.1 Hardware Specifications
C141-E219
2-3
(*3)
The seek time is as follows:
(*4) The start time is the time from power on or start command to when the HDD is ready, and the stop
time is the time for disks to completely stop from power off or stop command.
(*5) This value indicates during idle mode. Power supply at nominal voltage ±1%. 25°C ambient.
(*6) The maximum data transfer rate may be restricted to the response speed of initiator and by
transmission characteristics. 1 MB/s = 1,000,000 bytes/s.
(*7) Refer to 1.1 (12).
(*8) 1 MB = 1,048,576 bytes.
Seek
time [
m
s]
Seek Difference [4096 Cyl/div]