FRIGIDAIRE 137111500B - Manual (Page 16)

26.44” 26.
44”
(67.16cm) (67
.16
cm
)
15.00” 15.00”
(38.10cm) (38.10cm
)
27.00” 27.00”
(68.58cm) (68.58cm
)
16
Replacement parts: 1-800-944-9044 (in Canada 1-800-265-8352)
If replacements parts are needed for your dryer, contact
the source where you purchased your dryer, call 1-800-
944-9044 (in Canada 1-800-265-8352), or visit our
website, www.frigidaire.com, for the Frigidaire Authorized
Parts Distributor nearest you.
Accessories
MATCHING STORAGE PEDESTAL
White Pedestal - P/N NLPWD15
Black Pedestal - P/N NLPWD15E
A storage pedestal accessory, specifi cally designed for this
dryer may be used to elevate the dryer for ease of use. This
pedestal will add about 15” (38 cm) to the height of your
unit for a total height of 51.25” (130 cm).
DRYER STACKING KIT
P/N 134700600
Depending on the model you purchased, a kit for stacking
this dryer on top of matching washer may have been
included in the initial purchase of your dryer. If your model
did not include a stacking kit or you desire another stacking
kit, you may order one.
LP CONVERSION KIT
P/N PCK4200
Gas dryers intended for use in a location supplied with LP
must use a conversion kit prior to installation.
MOBILE HOME INSTALLATION KIT
P/N 137067200
Installations in mobile homes require use of MOBILE HOME
INSTALLATION KIT.
DRYING RACK
P/N 137067300
Depending on the model you purchased, a drying rack may
have been included in the initial purchase of your dryer.
If your model did not include a drying rack or you desire
another drying rack, you may order one.
UNIVERSAL APPLIANCE WRENCH
P/N 137019200
A UNIVERSAL APPLIANCE WRENCH is available to aid in
dryer/washer/pedestal feet adjustment.
TOUCH UP PAINT PENS
White Touch Up Pen - P/N 5303321319
Black Touch Up Pen - P/N 5304458932
Failure to use accessories manufactured by (or
approved by) the manufacturer could result in personal injury,
property damage or damage to the dryer.
- ELECTRICAL SHOCK HAZARD - Label all
wires prior to disconnection when servicing controls. Wiring
errors can cause improper and dangerous operation. Verify
proper operation after servicing.