Fujitsu Siemens Computers LOOX 400 - Manual (Page 38)

Operating the Pocket PC
30 A26391-K150-Z120-1-7619, Edition 3
Synchronising data with ActiveSync
To also have the current version of the data you have processed on the road on your Pocket PC
available on your PC/notebook, you must copy these data to your PC/notebook. This procedure is
conveniently enabled with so-called data synchronisation:
In the ActiveSync program you can specify that the respective latest version of a file be detected and
then automatically updated on the respective data carrier - regardless of whether it is the Pocket
PC or a PC/notebook.
You can synchronise your data between your Pocket PC and your PC/notebook via the cradle (see
the "Using optional cradle” chapter), using the ActiveSync cable or via infrared or Bluetooth.
You will find information on how you synchronise data using ActiveSync, in the ActiveSync help file on
your PC/notebook.
i
If you have not yet installed the ActiveSync program on your PC/notebook, you must install
it on your PC/notebook before the first data synchronisation between your Pocket PC and
your PC/n (see the section "Initial start-up").
Connecting Pocket PC to PC/notebook
2
4
1 3
► Switch your PC or notebook on.
► Connect the ActiveSync cable (1) to the ActiveSync port of the cradle.
► Connect the ActiveSync cable to a USB port (2) of your PC/notebook.
The Pocket PC is now connected to your PC/notebook. The ActiveSync partnership between your
Pocket PC and your PC/notebook will be established.