Fisher & Paykel DD36S - Manual (Page 7)

1
2
1 ½”
(38 mm)
max.
4 ¾”
(120
mm)
6
3 5 4
1
5
2 4 3
1
7
4
3
6
2
29 ½”
- 34 ¾”
(750 - 882.5 mm)
180 o 180 o 180 o
29 ½”
- 34 ¾”
(750 - 882.5 mm)
5
PLUMBING AND DRAINAGE OPTIONS 11
A B C
If space is limited for fixing, push
hose through drain hose support
to required height
If space is limited for fixing, push
hose through drain hose support
to required height
Supplied drain hose joiner
(ø 3/4” (19 mm)) waste tee)
Supplied drain hose joiner
(ø 3/4” (19 mm)) waste tee)
DishDrawer® with Waste Disposal DishDrawer® using Air Break
with Drain Hose Joiner
29 ½
”
-
34
¾ ”
(750
- 882.5 mm
)
29 ½
”
-
34
¾ ”
(750 -
882.5
mm
)
min. R 8 ”
(200 mm)
min. R 8 ”
(200 mm)
min. R 8 ”
(200 mm)
Air Break
HIGHL
OOP
min. 6”
(150 mm)
Ensure drain hose is routed
straight to joiner. Remove
excess drain hose material if
necessary. Do not shorten the
inlet hose.
Ensure drain hose is routed straight to
joiner. Remove excess drain hose material if
necessary. Do not shorten the inlet hose.
DishDrawer® and Standpipe
Ø 1 ½ ” (38 mm)
Fit the supplied
rubber washer.
Fit the supplied
rubber washer.
Fit the supplied
rubber washer.
Tighten with
wrench.
Tighten with
wrench.
Tighten with
wrench.
No leaks! No leaks! No leaks!
Connect the Inlet Hose Connect the Inlet Hose Connect the Inlet Hose
37 3⁄8” ( 950 mm)
Max. height to
top of Air Break
(countertop or
wall mounted)
(2,1) -2- 599796A DD36S installA2 USCA.indd 19/2/10 11:33:29 AM (2,1) -2- 599796A DD36S installA2 USCA.indd 19/2/10 11:33:29 AM