FujiFilm FinePix A150 - Manual (Page 15)

9
Fi
rs
t S
te
p
s
Basic Setup
A language-selection dialog is displayed the fi rst time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 64).
1 Choose a language.
SE SET NO NO
START RT MENU MENU
/ LANG. / LANG.
1.1 Press the selector up, down,
left, or right to highlight a lan-
guage.
1.2 Press MENU/OK.
2 Set the date and time.
YY.MM.DD 1. 1 12 : 00
AM
DATE / TIME NOT SET
2011
2010
2008
2007
2009
SET NO
2.1 Press the selector left or right to
highlight the year, month, day,
hour, or minute and press up
or down to change. To change
the order in which the year, month, and
day are displayed, highlight the date for-
mat and press the selector up or down.
2.2 Press MENU/OK.
3 Check the battery type.
A confi rmation message for the battery type
to be used appears.
Alkaline batteries are selected by default.
2 Tip: The Camera Clock
If the batteries are removed for an extended period, the camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned on. If the batteries are left in the camera for about two hours,
they can be removed for about twenty four hours without resetting the clock or language selection.