500 hours) – Friedrich RT5 User Manual

Page 10

FILTER

DIFF

ROOM

SET

REMOTE

6. Room temperature offset (+9°F to -9°F) (+4.5°C to -4.5°C)

Adjust to calibrate displayed room temperature to match actual room temperature.

Note: When not set to 0, ROOM will display

Press

the or

button to select.

Press

the SW6 button to advance to the next screen.

FILTER

DIFF

ROOM

SET

REMOTE

7. Maximum compressor cycles allowed per hour (-, 2-6)

- = as many as needed, 2-6 = maximum cycles/hour

Press

the or

button to select.

Press

the SW6 button to advance to the next screen.

FILTER

DIFF

ROOM

SET

REMOTE

(500 Hours)

8. Filter Check time (300-800, – – –)
Set

Fan Run Time (in hours) when Check Filter is displayed or set to – – – to disable.

Press

the or

button to select.

Note: To reset fi lter counter to zero and clear fi lter warning, press

the

and

buttons simultaneously for 5 seconds.

Press

the SW6 button to advance to the next screen.

FILTER

DIFF

ROOM

SET

REMOTE

9. Status Indicator Light (Lt 0 or 1)

0 = Status indicator never on

1 = Status indicator on with fi rst stage

Press

the or

button to select.

Note: Red light indicates heating cycle and green light indicates cooling cycle

Slide

the

Mode switch to Heat or Cool to exit confi guration.