FUJITSU M4097D - Manual (Page 22)

2-2
Cleaning Supplies and Areas Requiring Cleaning
Supplies
*1 If the display on the operator panel shows “Please clean Pick-roller”, then clean it regardless of the
frequencies recommended here.
CAUTION
*2 Do not clean the rubber rollers with cleaner F2.
NOTE
When the following paper types are used, it may be necessary to clean more frequently:
• Paper with a smooth surface, such as coated paper.
• Paper almost entirely covered with printing.
• Paper with special chemical coatings, such as carbonless paper.
*3 Refer to the Abrasion counter on the Operator panel to estimate when the next cleaning is necessary.
Document cover
Document
holding pad
Document
bed
Cleaning paper Contact your Every 5,000 sheets
dealer or
Cleaner F2 distributor • Plastic rollers (*2) 1 bottle
Apply Cleaner F2
to cotton swab.
Cleaner F1 or • PAD assembly 1 bottle.
Isopropyl alcohol Every 5,000 sheets Apply Cleaner F1
• Pick roller/Feed rollers/ to cloth.
Glass/Sheet guide
Every 5,000 sheets
Cotton swab
Dry cloth
Type No. Remarks Cleaning Supplies Frequencies (*1)(*3)