FUJITSU M4097D - Manual (Page 17)

1-8
Operation status
The operation status is indicated by the following messages:
When the Scanner Display turns Off and the power indicator
remains “On”, the scanner is in the Low Power Mode.
NOTE
One of the following will wake up the scanner:
• Pressing any button.
• Setting the paper on the ADF.
• Sending a command from the host computer.
The scanner displays the following screen when waiting for the
Start button to be pressed:
(Only When the Video Interface
Option is installed.)
When the Pick roller cleaning is necessary, the scanner displays
the following on the upper line:
When the ADF glass cleaning is necessary, the scanner displays
the following on the LCD:
Clean the Pick roller or the ADF glass in accordance with the
instructions given in chapter 2, Cleaning the ADF, and chapter 3,
Pick Roller.