Freecom Technologies Network hard drive - Manual (Page 27)

GB
8
27
Two unbound Classic SL Network Drives are also visible from "Classic SL
Network Drive Administrator Tool."
5. Enable the unbound Classic SL Network Drives by selecting either "Enable
Read/Write" or "Enable Read Only".
- Classic SL Network Drive cannot be used until it is enabled.
- Repeat this step for the second unbound Classic SL Network Drive.
6. Format Classic SL Network Drive.
- Before you can use the unbound Classic SL Network Drive, both Classic SL
Network Drives need to be formatted.
Please refer to Chapter 9 Formatting Classic SL Network Drive.
Advanced Drive Functions