Frymaster FOOTPRINT E4 - Manual (Page 66)

2-25
2.5.5.1 Heating Element Assemblies and Associated Parts cont.
ITEM PART # COMPONENT
1 Element Kits –
includes gaskets, grommets, tie wraps, screws and nuts.
826-2198 200V 1 7.0 kW (also used for 220V 8.5 kW)
826-2201 200V 1 8.5 kW
826-2208 200V 11.0 kW
√ 826-2192 208V 1 7.0 kW
√ 826-2197 208V 1 8.5 kW
826-2210 208V 11.0 kW
826-2200 220V 1 7.0 kW (also used for 240V 8.5 kW)
826-2205 220V 11.0 kW
826-2193 230V 1 7.0 kW
826-2199 230V 1 8.5 kW
826-2206 230V 11.0 kW
826-2194 240V 1 7.0 kW
826-2207 240V 11.0 kW
826-2204 400V 8.5kW
826-2195 440V 1 7.0 kW
826-2202 440V 1 8.5 kW
826-2211 440V 11.0 kW
826-2196 480V 1 7.0 kW
826-2203 480V 1 8.5 kW
826-2209 480V 11.0 kW
√ 2 826-2212 Probe, Temperature RE – includes tie wraps and grommet.
807-4324 Probe, Temperature Fast Ready
3 816-0681 Grommet, Probe
4 816-0480 Plug, .375-inch Dome
5 816-0688 Gasket, Element
6 809-1003 Screw, 10-32 X ⅜-inch Hex Head SS
* 809-0766 Nut, 10-32 Keps Hex Head SS
7 230-0784 Bracket, Temperature Probe
8 809-0518 Screw, 8-32 X ⅜-inch Slotted Hex Head
9 910-2042 Clamp, Element (Short)
10 230-0781 Clamp, Element (Long)
11 230-4902 Support, Full-Vat Element Rear
12 230-4101 Support, Full-Vat Element Front (use 823-5621 for 17kW Front Support)
13 809-0567 Tie-Wrap, Metal
14 810-1212 Pin, .125 X .5-inch Split
15 230-4903 Support, Dual-Vat Element Rear Dual Vat
16 230-4103 Support, Dual-Vat Element Front Dual Vat 14kW
823-5627 Support, Dual-Vat Element Front Dual Vat 17kW
17 810-3030 Spring, Element Lift Left
810-3031 Spring, Element Lift Right
18 220-1190 Bracket, Lower Spring Single Foot Print
220-0464 Bracket, Lower Spring
220-1855 Bracket, Lower Spring Fryer ½
19 220-0733 Bracket, Lower Spring Mating
20 810-1233 Handle, Element Lift
* Not illustrated.
√ Recommended parts.
The wire harnesses must
be replaced when
replacing 22kW elements
on all fryers, except 440V
and 480V, manufactured
before March 2007. (See
Page 2-30 for wire
harnesses.)