Frymaster FOOTPRINT E4 User Manual
Page 46
2-5
2.3.1 Back Panels, Control Panel Frames, Doors, Sides, Tilt Housings & Top Caps
cont.
ITEM PART
#
COMPONENT
1
Back Panel, Upper (Panel for five station fryer shown)
220-0421
Single Station Fryer CRS (Use 230-0422 for Stainless Steel)
220-1973
Fryer ½ Station Fryer CRS
220-0419
Two Station Fryer CRS (Use 230-0420 for Stainless Steel)
220-0423
Three Station Fryer CRS (Use 230-0424 for Stainless Steel)
220-0425
Four Station Fryer CRS (Use 230-0546 for Stainless Steel)
220-0611
Five Station Fryer CRS (Use 230-0612 for Stainless Steel)
2
Back Panel, Center (Panel for five station fryer shown)
220-0501
Single Station Fryer CRS (Use 230-0502 for Stainless Steel)
220-1977
Fryer ½ Station Fryer CRS
220-0487
Two Station Fryer CRS (Use 230-0490 for Stainless Steel)
220-0491
Three Station Fryer CRS (Use 230-0492 for Stainless Steel)
220-0499
Four Station Fryer CRS (Use 230-0500 for Stainless Steel)
220-0616
Five Station Fryer CRS (Use 230-0617 for Stainless Steel)
3
Frame, Control Panel (Frame for five station fryer shown)
106-5016
Single Station Fryer
106-6846
Fryer ½ Station Fryer
106-5221
Two Station Fryer
106-5018 Three
Station
Fryer
106-5019 Four
Station
Fryer
106-5020
Five Station Fryer
4
Tilt Housing (Housing for five station fryer shown)
823-5494 Single
Station
823-5999
Fryer ½ Station LH ½ fryer (use 823-5965 for RH ½ fryer)
823-5497 Two
Station
823-5489 Three
Station
823-5575 Four
Station
(use 106-7516 for Cracker Barrel)
823-5581 Five
Station
5
Top Cap (Top cap for five station fryer shown)
106-5195 Single
Station
(Also requires four 809-0079 1/4-20 Nutserts)
106-7060
Fryer ½ Station LH ½ fryer (use 106-6838 for RH ½ fryer) (Also requires four 809-
0079 1/4-20 Nutserts)
106-5196 Two
Station
(Also requires four 809-0079 1/4-20 Nutserts)
106-5197 Three
Station
(Also requires six 809-0079 1/4-20 Nutserts)
106-5198 Four
Station
(Also requires eight 809-0079 1/4-20 Nutserts)
106-5199 Five
Station
(Also requires ten 809-0079 1/4-20 Nutserts)
*
Heat
Shield
* 200-9614 Single
Station
* 200-9610 Two
Station
(Two are used on Four Station) (One used on Five Station)
* 200-9611 Three
Station
(One used on Five Station)
6L
231-0323
Side, Standard Cabinet Left SS (use 221-0323SP for Enameled Steel)
231-1345
Side, Left Deep Cabinet SS
6R
232-0323
Side, Standard Cabinet Right SS (use 222-0323SP for Enameled Steel)
232-1345
Side, Right Deep Cabinet SS
7 810-1105
Magnet,
Door
8
231-0352
Side, Filter Ready Cabinet Left SS (use 221-0352 for Cold Rolled Steel)
9
232-0352
Side, Filter Ready Cabinet Right SS (use 222-0352 for Cold Rolled Steel)
10
910-0889
Cover, 5-inch X 5-inch Access
11
910-0890
Cover, 5-inch X 7-inch Access
12
809-0359
Screw, #8 X ¼-inch Hex Washer Head
13
106-4397
Door, Left or Right (Left shown – move handle to opposite side for Right) - Standard
106-6899
Door, Left or Right – Fryer ½
14
809-0266
Screw, #10 X ½-inch Phillips Truss Head
15 210-9739 Handle,
Eurolook
Door
(use 230-2088 for Fryer ½ handle)
* Not illustrated.
continued on the following page...