Fisher-Price B3162 - Manual (Page 14)

Assembly
15
Fasteners
Seat Center Slots
Long Seat Belt
Seat
Tabs
Tabs
Slots
Slots
Slot
• Turn the seat face down on a flat surface.
• Position the long seat belt so the fasteners face each
other, as shown.
• Insert each end of the long seat belt through the two
center slots in the seat bottom.
• Position the two short seat belts so the fasteners face
each other, as shown.
• Insert the fastener ends of the short seat belts through
the slots in each side of the seat bottom.
• Pull the short seat belts completely through the slots
until the last T-loop at the opposite end of the belt
catches against the slot.
Note: You will pull one T-loop through the slot.
13
Short Seat Belt
Fasteners
Last T-loops
Side
Slot
Side
Slot
14
• Fit the six tabs on the bottom edge of the seat into the
slots inside and on the top edge of the vehicle.
• Push down near each tab until the seat “snaps”
into place.
14
• Turn the vehicle on its side.
• Insert four #8 x 3 /
4
" screws into the holes in the bottom of
the vehicle. Tighten the screws.
16
Bottom View