FUJITSU ScandAll PRO P2WW-2410-01ENZ0 - Manual (Page 38)

32
3.4 Scanning Using Barcodes
ScandAll PRO supports a job separation function with barcode-printed sheets (hereinafter referred
to as the "barcode"). The barcode-based job separation function can divide multiple pages of
scanned images into pre-determined unit and save them to different folders separately without
interruption. A PDF or TIFF (multipage) file can be separated and stored as multiple files in pre-
determined document unit. Not only the document counter, but the barcode recognition result
strings can be used for the folder names.
ScandAll PRO is capable of detecting the following types of barcodes:
The following lists the barcode detection conditions:
Code Character set Digit number
UPC/EAN/JAN Numbers UPC:12
(UPC-A only; includes check digit)
EAN, JAN: 8 or 13 (includes check
digit)
CODE39 Numbers/Alphabets/7 symbols 1 to 32
(excludes start/stop codes)
CODABAR 4 start/stop character numbers,
10 alphabets and symbols 1 to 32
(excludes start/stop codes)
CODE128 Full ASCII 1 to 32
(excludes check characters)
Item Condition
Barcode height 10 mm to 30 mm
Barcode length 300 mm or less
Barcode margins 5 mm or more on each side of barcode
Barcode base color White (This may not be recognized correctly depending on the
hue of white color of the paper scanned.)
Resolution 200 dpi to 600 dpi
Barcode angle Horizontal, and vertical