Fisher-Price JEEP RUBICON H4433 - Manual (Page 10)

N1476pr-0920
10
ASSEMBLY F
N1476pr-0920
Fit the steering wheel cap into the center of the steering wheel.
Insert two #8 x 1" screws and tighten. •
•
Insert a hood latch into one of the slots near the hood on
the front of the vehicle.
Twist the base of the hood latch ¼ turn to secure it to
the vehicle.
Repeat this procedure to attach the other hood latch to
the vehicle. •
•
•
Insert the tabs on the hood into the slots in the front end of
the vehicle.
Pull the hood forward and lower it closed.
Turn the hood latches ¼ turn to secure the hood. •
•
•
Steering Steering
Wheel Cap Wheel Cap
7
9
10
FRONT VIEW
Hood Latch
Slot
Hood Latch Hood Latch
Slots Slots
Tabs Tabs
Hood
8
Turn the vehicle on its side.
Fit the steering column cap onto the end of the steering column.
Insert a #8 x 3/4" screw through the hole in the steering column
cap and steering column.
While holding the steering column cap in place, tighten the screw.
Turn the vehicle upright. •
•
•
•
•
Steering
Column Cap