Fluke Thermal Imagers Ti10 - Manual (Page 14)

Ti10, Ti25, TiR and TiR1
Users Manual
8
Selecting a Palette
The palette menu provides different thermal viewing patterns. Grayscale, Blue-
Red, High Contrast, and Ironbow are available in all four Imagers. The TiR1
and Ti25 add Amber and Hot Metal to the list. To select a palette:
1. Press a until Palette appears over c.
2. Press the softkey labeled Palette to display the available palette options.
3. Press the softkey labeled Up or Down to move between the palette
options.
4. Press the softkey labeled Back/Done to set the Imager to the selected
palette.
Setting the Range
Viewing temperature (level and span) is set either automatically or manually.
To set the range, do the following:
1. Press a until Range appears over d.
2. Press the softkey labeled Range .
3. Press the softkey labeled Manual to set the Imager to manual ranging and
press the softkey labeled Auto to select auto ranging.