FUJITSU fi-5120C - Manual (Page 26)

AP-4
Appendix2 DAILY CARE
■ Cleaning Materials
* For details about cleaning materials, contact the
FUJITSU scanner dealer where you purchased the
scanner.
■ Cleaning Method
The ADF must be cleaned with a lint-free cloth moist-
ened with the Cleaner F1.
■ Parts to Clean and When
For details on the cleaning the ADF, refer to "3.3 Clean-
ing the ADF" in fi-5120C/fi-5220C Operator’s Guide on
the Setup CD-ROM".
WARNING
The glass surface inside the
ADF becomes hot during the
operation.
Before you clean inside the
scanner, turn off its power and
unplug the AC adapter from the
outlet. Wait for at least
15 minutes.
Do not turn off the scanner when
you clean the Feed rollers.
Cleaning
Materials
Parts
Number
Remarks
Cleaner F1
(or isopropyl
alcohol)
CA99501-
0013
1 bottle
Moisten the cloth with
this fluid and wipe the
scanner clean. (*)
Lint-free dry
cloth
Commercially available one
Part to clean Standard Cleaning Cycle
Pad ASSY Clean these parts after every
1,000 scans.
Pick roller
Feed rollers
Plastic rollers
Glass
ATTENTION
The scanner must be cleaned frequently
if you scan any of the following type of
paper sheets:
•
Documents of coated paper
• Documents that are almost completely
covered with printed text or graphics
•
Chemically treated documents such as
carbonless paper
•
Documents containing a large amount
of calcium carbonate
• Handwritten documents