Furuno FELCOM 16 - Manual (Page 32)

1. OPERATIONAL OVERVIEW
1-12
3. Press the [
↑] or [↓] key to choose option desired and press the [Enter] key.
4. Press the [Esc] key.
Note 1: On some menus the update window appears after you press the [Esc]
key. This is done to ask you to confirm settings. Yes is selected in the
Update window; press the [Enter] key to register settings, or press [
→]
to choose No and press the [Enter] key to escape.
Update
Yes No
Note 2: The following functions are not available:
Keying Sequence Item
F3-1
Selection of Priority on Transmit Message
F8-1 NAV PORT, MESSAGE OUTPUT PORT, ACTIVE
PORT, EGC OUTPUT PORT, NETWORK SETUP
on System Setup menu
F8-4 Waypoint on EGC Setup
1.5 Error Messages and Alerts
The terminal unit displays error messages and alerts to call your attention to
misoperation, failed operation and system error. A list of error messages appears
in Chapter 7 and alerts in the Appendix.
To erase an error message or alert, press the [Esc] key.
No. Message File Station LES Priority Send Status Delivery
Send Message Log
Log
CAUTION
No Message.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
1. Send Message Log
2. Receive Message Log
Location of error messages and alerts