Furuno FELCOM 16 - Manual (Page 28)

1. OPERATIONAL OVERVIEW
1-8
(2) Communication unit status
IDLE Idle (awaiting receiving, awaiting transmitting)
IDLE (PENDING) Awaiting reply from LES
SENDING Sending
RECEIVING Receiving
LOGIN
Logged in with NCS
LOGOUT Logging out with NCS
Data Report Sending data report
TESTING PV (Performance Verification) testing
TEST SETUP Requesting PV testing
SCANNING NCS scanning
EGC RECEIVER EGC-only receiver operation
(Reverse video)
Delivery Status Req.
Transmitting delivery status request
Forced Clearing Stopping receiving, transmitting, or scanning
(3a) Communication status
CALLING Now calling
WAITING FOR ACKNOWLEDGEMENT Waiting for acknowledgement from
LES.
RECEIVING EGC MESSAGE
Now receiving EGC message
WAITING FOR BACKOFF Waiting to transmit data report
Successful Login. Login was successful
Login failed. Login failed
Successful Logout. Logout was successful
Logout failed. Logout failed
Successful Forced Clearing. Forced clearing successful
Forced Clearing Failed. Forced clearing unsuccessful
SENDING MESSAGE PACKETS Sending TX message packets
WAITING FOR ACKNOWLEDGEMENT Waiting for acknowledgement from LES
Successful sending to LES.
Message successfully sent to LES
Sending message failed. Message could not be sent to LES
Call rejected. LES rejected your message
Call pending. LES temporarily suspending
communications
Received Call.
Call received from LES
Received Call(ITA2). Call(ITA2) received from LES
RECEIVING MESSAGE PACKETS Receiving message packets
CLEARING Clearing TX sequence
Successful receiving. You successfully received message
Receiving failed. You could not receive message
Successful Data Report. Data report successfully sent.
Data Report failure. Data report could not be sent.
PV TEST CALL is rejected. PV test call rejected by NCS
PV TEST CALL is pending. PV test pending by LES
TEST-RECEIVING MESSAGE Receiving test message from LES
TEST-SENDING MESSAGE Sending test message to LES