beautypg.com

Selecting the effect type, Effect types preset for eff 2 – Fostex VM08 User Manual

Page 20

background image

20

Model VM08 Owner’s Manual

Name

Parameter type

Explanation

29

MonoDELAY

DELAY

Mono delay

30

PanDELAY

DELAY

Panning delay

31

MonoBpmDL

BPM DELAY

Mono delay. Specify BPM and note value to set the delay time.

32

PanBpmDL

BPM DELAY

Panning delay. Specify BPM and note value to set the delay time.

33

Short DL

SHORT DELAY

Short delay that allows you to set the delay time precisely.

34

DOUBLING

DOUBLING

Doubling that allows you to set separate delay times for L and R.

35

CHORUS

CHORUS

Produces a chorus effect. A doubling effect can also be added.

36

FLANGE

FLANGE

Produces a flanging effect.

37

MonoPITCH

MONO PITCH

Pitch shift adjustable in a +/-2 octave range.

38

DlyPITCH

DELAY PITCH

Pitch shift with a feedback delay, allowing strange effects to be produced.

EQ

1
~

28

Effect types preset for EFF 2

1--28 are the same effect types as the EFF 1 presets listed on the preceding page. (For details refer to the preceding page.)

Selecting the effect type

Here's how to select the effect type for EFF 1 or EFF 2.

Press this to set the effect type
for EFF 1.

Press this to set the effect type
for EFF 2.

* As described earlier in "Normal mix mode," raise the INPUT fader of a channel to which a

signal is being input and raise the MASTER fader, so that the sound is heard at an appropriate
level.

* As described earlier in "Setting the effect send level," raise the EFF 1 SEND level or the EFF 2

SEND level for the channel(s) to which you wish to apply the effect.

1. If you wish to set EFF 1, press the EFF EDIT

mode EFF 1 key. To set EFF 2, press the EFF 2
key.

With the initial settings, the following displays
will appear.

When the EFF 1 key is pressed:

With the initial settings, [Norm HALL] will ap-
pear.

When the EFF 2 key is pressed:

With the initial settings, [CHORUS] will appear.

2. Use the DATA encoder to select the effect type.

The effect types listed in the foregoing tables
will appear in succession. When an effect type
appears, it will be blinking. The blinking indi
cates that the effect type has not yet been
selected.