Fujitsu Siemens Computers C Series - Manual (Page 14)

C Serie
6 A26391-K110-Z100-1-7619
Switching on the notebook for the first time
When you switch on your notebook for the first time, the supplied software is installed and
configured. You should plan some time for this, as this process may not be interrupted.
To simplify the initial operation of your notebook, one or two operating systems are preinstalled on
the hard disk (dual installation). If two operating systems are preinstalled, you can select during
initial operation which of the two operating systems you want to install.
i
The selection of the operating system cannot then be reversed.
a
Ê Press the Suspend/Resume button to switch on the notebook (1).
Power-on indicator of the notebook in the display field (a).
!
After switch-on a self-test (POST, Power On Self Test) is automatically carried out. Never
switch the notebook off during the self-test.
Leave the external power adapter connected to your notebook during the initial installation.
Once the installation has been started, the notebook must not be switched off!
During installation, the notebook may only be rebooted when you are requested to do so!
Ê During installation, follow the instructions on screen.
Consult the operating system manual if there is anything unclear about the requested input data.
i
You will find further information about the system, drivers, utilities, updates, manuals etc.
on the "Drivers & Utilities" CD supplied.