Fisher-Price BOUNCE N GO G4815 - Manual (Page 5)

5
5
• Fit an axle cover over the cap nuts and to the front end of the frame.
Push down on the axle covers to “snap” them into place.
Hint: You may need to carefully tap the axle covers with a hammer
to secure in place.
Axle Covers
6
• Slide a 5 /
16
" washer onto a front axle.
• Next, fit an axle bushing, barrel side first, onto a front axle.
7
• Locate both small, front wheels.
• Slide a small, front wheel, flat side first, onto the front axle.
Assembly
5 /
16
" Washer
Axle
Bushing
Front Axle
Small
Front Wheel
8
• Fit a wheel bushing, peg side first, into the small, front wheel and onto
the front axle.
Wheel
Bushing