Meridian Audio 568 - Manual (Page 63)

56
Setting up the digital surround processor
To connect to Meridian DSP
loudspeakers
DSP5000C
Centre (master)
DIGITAL OUTPUTS COMMS
COMMS
OUTPUT INPUT
DIGITAL
OUTPUT
DIGITAL INPUTS
2 1
COMMS
OUTPUT INPUT
DIGITAL
OUTPUT
DIGITAL INPUTS
2 1
COMMS
OUTPUT
INPUT
DIGITAL
OUTPUT
DIGITAL
INPUTS
1
2
S5 lead
S5 lead
M5 lead
S5 lead (digital unused)
DSP5000 – Main R DSP5000 – Main L
568 Digital Surround Processor
511 S-patch box
● Use the comms part of an M5 lead to connect one of the
COMMS sockets on the 568 to the digital speaker you have
chosen as the master (typically the centre speaker).
● Use the audio part of the M5 lead to connect the digital
speaker to the appropriate digital output socket.
● If your system includes more than two Meridian DSP
loudspeakers you will need a 511 S-patch box (available
separately) to link together the S5 leads from each speaker.
Connect the COMMS output from the master digital speaker
to one socket on the 511 using an S5 lead.
● Link all the other digital speakers together using S5 leads, as
shown in the illustration. The other sockets on the 511 can be
used to distribute the comms to each slave speaker.
● Use the duplicate sockets on each digital speaker to link the
speakers together in pairs, corresponding to the pairs of
channels on the digital outputs.
Connecting speakers