Freecom Technologies Multimedia Player User Manual

Page 35

6. Select the hard disk by its number where the "Usage" contains no value but

only a percent symbol. Select the number of the corresponding hard disk
and confirm by pressing the "Return" key.

Now your hard disk is activated and ready to be partitioned.

Note: Partition size of large hard disks will not be displayed
correctly! However partitioning results will be OK.

7. Select Option 1 "(Create DOS partition or Logical DOS drive)" by pressing

'1' and confirm with 'Return'.

8. Select Option 1 "(Create primary DOS partition)" by pressing '1' and

confirm with 'Return'.

Wait until drive integrity is completely checked.

Format the Built-in HDD via USB