FUJITSU MHA2032AT - Manual (Page 36)

Installation Conditions
3-8 C141-E042-01EN
3.3.2 Cable connector specifications
Table 3.2 lists the recommended specifications for the cable connectors.
Table 3.2 Cable connector specifications
Name Model Manufacturer
Cable socket
(44-pin type)
89361-144 BERG
Cable
(44-pin type)
FV08-A440 Junkosha
For the host interface cable, use a ribbon cable. A twisted cable or
a cable with wires that have become separated from the ribbon may
cause crosstalk between signal lines. This is because the interface
is designed for ribbon cables and not for cables carrying differential
signals.
3.3.3 Device connection
Figure 3.7 shows how to connect the devices.
Figure 3.7 Cable connections
ATA interface and
power supply cable
(44-pin type)