Furuno FA-150 - Manual (Page 61)

APPENDIX
AP-2
(Continued from previous page)
DIAG-
NOSTICS
MONITOR TEST (Displays program no.; checks ROM, RAM, LCD, controls.)
TRANSPONDER
TEST
PWR ON/OFF HISTORY (Log for time of equipment power on and off.)
TX ON/OFF HISTORY (Log for time of equipment transmission on and off.)
MEMORY CLEAR
FOR SERVICE (For service technician. Not accessible by user.)
MEMORY TEST (Displays program no.; checks ROM and RAM.)
GPS TEST (Display program no. and checks internal GPS receiver.)
MONITOR CLEAR (YES, NO)
SET USER DEFAULT (YES, NO)
GPS COLD START (YES, NO)
NAV STATUS (00-15)
DESTINATION
ARRIVAL TIME
CARGO TYPE & CREW
DRAUGHT ( 0.0 - 25.5)
DATE
TIME
SELECT
EDIT
DELETE
[NAV STATUS]
key
CREW ( 0-8191)
TYPE NO. (10-99. See page 1-10.)
VIEW CHANNEL (View power and channel settings of channel in use.)
EDIT CHANNEL
CHANNEL
SETTINGS
FROM MMSI
POWER (2W, 12.5W)
CH NO. CH-A, CH-B
MODE CH-A, CH-B
ZONE ( 1-8 (nm), 5)
Press [ENT] key to display.
CH AREA RIGHT TOP
LEFT BOTTOM
LAT
LON
LAT
LON
SELECT NO. ( 0-9)
TIME
FROM MMSI (HIGH SEA, MMSI, EMPTY)
TYPE (HIGH SEA, AIS, PI, DSC,
MANUAL, EMPTY)
COM4 ( 1, 2, 3)
COM5 (1, 2, 3)
COM6 (1, 2, 3)
COM4 (1, 2, 3)
COM5 (1, 2, 3)
COM6 ( 1, 2, 3)
SET
PRIORITY
L/L, COG, SOG
HDG
ROT (Same choices and defaults as HDG)
(Continued from previous page)