Furuno FA-150 - Manual (Page 25)

1. OPERATION
1-14
1.7.2 Target list (displaying target data)
1. At the plotter display, press the DISP key to show the TARGET LIST, which
lists all AIS targets being detected by the FA-150.
Target's name, and
range and bearing
(from north) from
own ship to target
Press X to switch to
DANGEROUS LIST.
(See para. 1.7.3.)
n
m
NAME RNG( ) BRG( ° )
FURUNO 2.90 276.1
VOYAGE 3.10 292.9
BASE 4.30 279.5
SAR 8.60 82.0
INTREP 9.10 123.1
1/ 10 [ T ] DTL[ENT] DNG[ X ]
[TARGET LIST]
Target type symbols
None: Ship
: Base station
: SAR (Search and Rescue)
: Aid to Navigation
Target list
Note 1: If the dangerous target list appears, press ◄ to switch to the target
list.
Note 2: If there is no data for the target selected, the message NO SEL
appears. Hit any key to escape.
Note 3: Targets are automatically sorted in range order (closest to furthest)
when no key is operated for 30 seconds. Target order is then
updated every five seconds.
Note 4: The range and bearing are updated when AUTO SORT on the
USER SETTINGS menu is OFF, however target order is not
updated. To do this, press ◄, and targets are sorted in range order.
“NOW SORTING” is shown while sorting.
Note 5: You may also choose a target directly on the plotter display. Press
◄ or ► to paint the circle of a desired target in black and then
press the ENT key. You can sort targets in range order: Press ► to
sort in closest to furthest order; ◄ to sort in furthest to closest
order. The display then looks something like the one shown at the
top of one of the next page. If you wish to see other target data, go
to step 3 below.
2. Use ▼ or ▲ to choose the target whose data you wish to view, and then
press the ENT key. The display then looks something like one of the
displays shown on the next several pages, according to type of target.
3. Use ▼ or ▲ to scroll the display to see other data.