FUJITSU fi-434PR - Manual (Page 12)

10
After installing the imprinter, check if the printing operation can be done by using the Offline Print Test mode of the
scanner.
■ Print test mode
This mode tests the printing performance of the imprinter.
Turn the power on while pressing the [Exit] button on the scanner's operator panel.
The scanner enters the imprinter test mode and the LCD displays “Print Test”.
Place paper on the ADF paper chute.
Press the [Start] button.
One sheet of paper is fed and printed.
To print another sheet of paper, press the [Start] button again.
With three pages printed, you can check all characters available
for printing. (Printing characters are listed in Chapter 7,
“Specifications”.)
To exit the <>, turn off the power.
1
2
3
4
5
(Screen 1)
Use an A4 or letter size page for the imprinter test. Shorter paper may cause printing to stop halfway.
(4) Operation Test
6
P r i n t T e s t