Furuno INMARSAT-C MOBILE EARTH STATION FELCOM 12 - Manual (Page 99)

4-13
Note: If a file name which was entered manually does not exist
when you attempt to transumit the file at step 13. “Input
Error: Message File” appears. Press any key to erase the
error message then enter correct name.
Canceling transmission
As noted earlier a transmit message is held in the buffer, usually until
it is transmitted satisfactorily. To cancel transmission on a message
held in the buffer, do the following:
1. Press [F3] to display the Transmit menu.
2. Press [2] to display the Cancel screen.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Current State: IDLE
DCE Ver **
SYNC ( NCS )
NCS: POR LOGIN 97-08-08 07:37 (UTC)
<[1] UNTITLED1>
0001| t
ASCII
----*---------+---------+---------+---------+---------+---------+---------<
25 Char. [ Line 2/ 2 Col. 1 ] [Insert ]
Transmit
1. Transmit Message
2. Cancel
3. Request Delivery Status
Cancel
No.
01 Message File
edit_msg.001 Station LES
SANTA PAUL Priority
Normal Send Status
Waiting Delivery
Figure 4-20 Sample cancel screen
Send status
Waiting: Waiting to transmit message.
Sending: Now sending message.
Fail: Failed transmission
Rejected: Message rejected by LES.
Pending: LES circuits occupied.
3. Select message you want to cancel.