Furuno CSH-53 - Manual (Page 40)

5-2
2. Operate the arrow keys in sub panel 1 to select a menu. As
you move through the menu, each item, initially shown as
blue on gray, universes to gray on blue to show selection.
For example, select the HIST DSP/GRPH menu.
3. Press the MENU key to display menu selected.
USER MENU
Select item with dc[ \ keys and press MENU key.
Press END key to close menu.
HIST Window DSP
Fish Histogram
AUDIO
ON
PRT/STBD
OFF
H-Slice
HIST DSP/GRPH
Figure 5-2 HIST DSP/GRPH menu
4. Operate the up and down arrow keys in sub panel 1 to select
menu item, and the right and left arrow keys to select op-
tion.
5. Press the END key to close the menu. Press the key again to
display picture.
Note: The HELP key provides menu operating information.
Menu screen location and display mode
Menu screen location depends on display mode as shown in the
figure below.
Menu
Normal Mode ES Mode
Menu
Figure 5-3 Menu screen location and display mode