FUJITSU fi-60F - Manual (Page 50)

36
4.1 Basic Specifications
*1) The scanning speed is the maximum speed of the scanner hardware. Software pro-
cessing time such as data transfer time is added to the actual scanning time.
*2) If you connect the scanner with USB 2.0, it is required that the USB port and the
Hub are compliant with USB 2.0. The scanning speed may slow down when you
connect the scanner with USB 1.1. If your computer has the compatible USB 2.0
port, please use it.
1 Scanner Type Flatbed -
2 Image sensor Color Contact Image Sensor
(CMOS IC)
3 Light source Three LEDs (RGB)
4 Scanning
area Maximum 148 x105mm
5.8 in X 4.13 in A6
-
5 Scanning
Speed
(Note (*1))
Binary
(monochrome) 1.0 sec 200 dpi, max size
USB 2.0
Color 1.3 sec 150 dpi max size
USB 2.0
6 Optical Resolution 600 dpi -
7 Output reso-
lution Binary
(monochrome) 50 - 600 dpi Scalable in 1 dpi incre-
ments
Grayscale 50 - 600 dpi Scalable in 1 dpi incre-
ments
Color 50 - 600 dpi Scalable in 1 dpi incre-
ments
8 Grayscale level
(internal) 8 bits per color Internal 16 bits
9 Halftone Patterns Dither / error diffusion -
10 Interface
(Note (*2)) USB 2.0 / 1.1 B type