FUJITSU fi-60F - Manual (Page 25)

1.3 How to Use the Scanner Driver
fi-60F Image Scanner Operator’s Guide
11
BASIC SCANNER OPERA
T
IONS
1
■ FUJITSU ISIS Scanner Driver
FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi
series by using application software that complies with The ISIS standard.
The following describes the procedure with examples of QuickScan for ordinary scanning by using
this driver software.
The procedure may vary depending on your application. If you use an application other than
QuickScan, please refer to its Guide or Help for further information.
Using the FUJITSU ISIS Scanner Driver for Scanning
1) Startup the application.
From the [Start] menu, select [All Programs] - [QuickScan] and click [QuickScan].
2) Select your scanner on the window below.
Select [Scan] - [Select Scanner] on the menu bar.
3) Select [Fujitsu fi-60F], then click the [OK] button.
4) Select [Scan] - [New Batch] on the menu bar.