FUJITSU PRIMERGY ECONEL30 - Manual (Page 7)

System configurator and order-information guide
B PRIMERGY Econel30 Status 2003-10-28
Section V Removable Media Drives
There is 1 drive bay 3.5" occupied by 1 floppy disk 3.5"/ 1.44MB and
3x 5.25" bays for accessible drives.
S26361-F3008-E1
CD-RW / DVD drive
1x 48/24/48/16 IDE
only W2K and Linux
1.6 * 5.25", anthracite bezel
max. 1x per system
S26361-F2238-E3
Tape drive SLR 100
50GB, 5MB/s, U2W SCSI
Connector: HD68
without cable
incl. description (Ger/US)
data and cleaning cartridge
1.6 * 5.25", anthracite bezel
max. 1x per system
1x
S26361-F2233-E3 S26361-F2848-E3 S26361-F2849-E3
Tape drive DAT DDS4 Tape drive DDS Gen5 Tape drive VXA-2
S26361-F2233-E31 (only for OBDR) 36GB, 3MB/s, U2W SCSI 80GB, 6MB/s, U2W SCSI
DDS4 for One buttom dis. Recovery Connector: HD68 Connector: HD68
20GB, 2.8MB/s, U2W SCSI without cable without cable
Connector: HD68 incl. description (Ger/US) incl. description (Ger/US)
without cable data and cleaning cartridge data and cleaning cartridge
incl. description (Ger/US) 1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel
1.6 * 5.25", anthracite bezel max. 1x per system max. 1x per system
max. 1x per system
Section VI Hard disk drives
One hard disk drive is in the basic unit included
A. Hard Disks for IDE Basic Units
S26361-F2263-E40 S26361-F2263-E80 S26361-F2263-E120
Hard disk 40GB DMA 100 Hard disk 80GB DMA 100 Hard disk 120GB DMA 100
3x fitting height 1" fitting height 1" fitting height 1"
occupies 3.5" drive bay occupies 3.5" drive bay occupies 3.5" drive bay
max. 3x per system max. 3x per system max. 3x per system
If you install more than 2 IDE Hard Disks, an IDE-RAID Controller (S26361-F2567-E2) is needed.
At a RAID controller only drive assemblies with same capacity may be attached.
B. Hard Disks for SCSI Basic Units
S26361-F2824-E136 S26361-F2824-E173
Hard disk 36GB U 160 SCSI Hard disk 73GB U 160 SCSI
3x fitting height 1" fitting height 1"
occupies 3.5" drive bay occupies 3.5" drive bay
max. 3x per system max. 3x per system
C
SCSI Basic Unit or
SCSI Controller are
needed for Backup
Drives.
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server 7 of 11