Installation instructions connecting antenna – Hitachi 42PMA500 User Manual
Page 48
46
Monitor rear panel
Speaker (R)
Speaker (L)
20
18
16
14
12
10
8
6
4
2
21 19
17
15
13
11
9
7
5
3
1
antenna
Make sure that the power switch of the monitor is turned off.
INSTALLATION INSTRUCTIONS
Connecting Antenna
Precautions when connecting the antenna
• Please use a coaxial cable which is free from interference to connect the antenna. Avoid using a parallel flat
feeder wire as interference may occur, causing reception to be unstable and stripe noise to appear on the
screen.
• Avoid using indoor antenna as this may be affected by interference. Please use CATV net or outdoor
antenna.
• Keep the power cord as far away from the antenna wire as possible.
If there are noise appearance in the picture of VHF-Low band channel, please use the double-shielded cable (not
provided) for RF LEADS to reduce the noise.