Husqvarna 1153176-26 - Manual (Page 3)

CONTENTS
English – 3
Contents
KEY TO SYMBOLS
Symbols on the machine: ..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents ............................................................... 3
INTR ODUCTION
Dear Customer , .................................................... 4
WHA T IS WHAT?
What is what on the chain sa w? ........................... 5
GENERAL SAFETY PRECA UTIONS
Bef ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 6
Personal protective equipment ............................. 7
Machine
′
s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL Y
Fitting the bar and chain ....................................... 16
FUEL HANDLING
Fuel ...................................................................... 17
ST ARTING AND STOPPING
Star ting and stopping ........................................... 19
W ORKING TECHNIQUES
Bef ore use: ........................................................... 21
General working instructions ................................ 21
How to avoid kickback .......................................... 27
MAINTENANCE
Gener al ................................................................. 29
Carburettor adjustment ......................................... 29
Carburettor with movement limiters ...................... 29
Carburettor without movement limiters ................. 30
Checking, maintaining and servicing chain saw
safety equipment .................................................. 32
Muffler .................................................................. 34
Starter .................................................................. 35
Air filter ................................................................. 36
Spark plug ............................................................ 36
Lubricating the bar tip sprocket ............................ 37
Needle bearing lubrication ................................... 37
Adjustment of the oil pump ................................... 37
Cooling system ..................................................... 37
”Air Injection” centrifugal cleaning ........................ 38
Winter use ............................................................ 38
Heated handles .................................................... 38
Maintenance schedule ......................................... 39
TECHNICAL D ATA
T echnical data ...................................................... 40
Bar and chain combinations ................................. 41
Saw chain filing and file gauges ........................... 41
EC-declaration of conformity ................................ 42