Hitachi Koki USA DDC 52N - Manual (Page 95)

3-57
8. Auxiliary Functions
Chapter 3
Mak
in
g
C
o
pies
Touch .
Place the original.
Select the desired erase function
(“Position”).
Hold down the or key until the
desired erase width is reached.
Useful Tip
You can change the erase width in 1mm
increments within the range 5 ~ 20mm.
Touch .
NOTE
The erase width represents that on the original,
not on the copy. So, use care when making a
reduction or enlargement copy.
Example: Erasing the margin of an A3 size
original on a copy reduced by
× 0.5:
If you want to erase the 20mm-wide margin on
the original, select 20mm for the erase width.
Using a Particular Edge/Frame Erase
Function
1 Edge/Frame Erase
1155O345CA
2
3
1155O346DA
4
1155O348DA
5 Enter
1166O255AA
Original (A3L)
Copy (A5L)
10mm
20mm
x0.5