Hitachi Koki USA DDC 52N - Manual (Page 61)

3-23
5. Selecting the Finishing
Chapter 3
Mak
in
g
C
o
pies
Touch the desired finishing function key.
Touch
.
NOTES
• The size of the copy paper for Hole Punch is
A3L, A4L and A4C only.
• Hole Punch is not possible in the Interrupt
mode.
• When making copies in the Hole Punch Mode,
make sure to load the originals into the
Document Handler in the correct direction.
☞p. 3-33
Useful Tips
• If you do not select a hole-punching position,
the copier autmatically sets the Hole Punch
position according to the original feeding
direction ilustrated below.
• When making copies from either the A3L or
B4L size, the copier autmatically speify the
hole punching position as shown below.
Key:
Use this key when you want to place your original
in a direction other than the standard or make
punch holes in positions other than those made
automatically.
Touch .
Touch the desired hole-punching position.
Touch .
Hole Punch
1
Hole Punch
1155P014CB
1155O786DA
Original Copy
Original Copy
1155O787DA
Original Copy
1155O788DA
Select Position
1 Select Position
1155P015CB
2
1155P025DB
3 Enter