HP 30292B - Manual (Page 17)

HP3000
Bus ness
Servers
– Physical network map identifying relevant
network hardware components.
• Verifying that the necessary host mainframe
or AS/400 software is installed and config-
ured to support HP LU 6.2 API. The cus-
tomer should consult the “HP SNA Products
Remote System Configuration Guide”
(P/N J2220-61025), or the “HP SNA
Products: AS/400 Guide” (P/N 5960-1629)
for details.
• Verifying that SNA Link/V, SNA/SDLC
Link/iX, or SNA/X.25 Link/iX is properly
installed and configured prior to the instal-
lation of HP LU 6.2 API.
• Updating the HP 3000 system to the proper
release level and installing the HP LU 6.2
API software using AUTOINST. Refer to the
HP 3000 MPE/iX Installation and Update
Manual (36123-90001) for MPE/iX systems
or the HP 3000 Software Update Manual
(32033-90036) for MPE V systems.
• Verifying that all of the necessary software
modules have been successfully installed by
AUTOINST and are at the correct version
levels using the NMMAINT.PUB.SYS utility.
• Configuring HP LU 6.2 API in order to fully
integrate HP LU 6.2 API into the existing
customer network.
HP Responsibility
Following the installation of HP LU 6.2 API,
HP is responsible for the following:
• Confirming that all of the necessary soft-
ware modules have been installed and are at
the correct version level.
• Configuring 1 LU with ‘Unsolicited Bind’
equal to ‘Y’.
• Starting the APPC subsystem and verifying
that the LU is in a PENDING or ACTIVE
state.
These steps complete HP’s portion of the
installation and minimum configuration of
HP LU 6.2 API.
Additional Implementation
Assistance
For implementation needs that go beyond
installation, the customer can either provide
self-support, or can purchase additional
services from HP. These services include
Network Startup and HP ConsultLine. In
addition, the customer can also purchase
service from HP on a time-and-materials basis.
Network Startup includes implementation
scheduling and coordination assistance,
network configuration and verification testing,
and network documentation.
Support Products
HP offers a spectrum of support service
products to help plan, implement, operate,
and manage your multivendor network
throughout the network lifecycle.
For more information, contact your HP Sales
Representative, or refer to the HP data sheets
for specific support services.
Documentation
For both HP LU 6.2 API/V and HP LU 6.2 API/iX:
• J2220-61025 HP SNA Products Remote
System Configuration Guide
• 30294-61000 HP LU 6.2 API:
• Application Programmer’s Reference Manual
For HP LU 6.2 API/iX:
• 5960-1629 HP SNA Products: AS/400 Guide
• 30294-61002 APPC Subsystem on MPE/iX
Node Manager’s Guide
For HP LU 6.2 API/V:
• 30253-90002 LU 6.2 API/V Node Manager’s
Guide
• 30253-90004 APPC Subsystem on MPE V
Node Manager’s Guide
17