Introduction, Underwriter's laboratories (ul) listing – Home Automation II User Manual
Page 9
Page 1
INTRODUCTION
Thank you for purchasing your new OmniPro II automation system. You are about to enjoy a new feeling of security, comfort,
convenience, and control. OmniPro II coordinates lighting, heating and air, security, scenes, and messages based on your lifestyle
and schedule.
Please take a few moments to become familiar with all of the features of your system by reviewing this manual. Please keep this
manual on file for future reference.
It is recommended that you also review the installation and operating instructions provided with your smoke and gas detectors (if
used in your system). If you do not have a copy of these documents, ask your installer - See Underwriter's Laboratories
Requirements.
In the event that there are any questions, please call your installer first. If you need assistance directly from the manufacturer, call
us at (504) 736-9810, between the hours of 9:00 AM and 5:00 PM Central Time, Monday-Friday. We will be happy to assist you.
When calling, please have the model and serial number of your unit, which can be found on the inside of the controller.
For your convenience, we suggest that you record this information:
MODEL
NUMBER:
________________________
SERIAL NUMBER:
________________________
Underwriter's Laboratories (UL) Listing
The 20A00-2, -5, and -22
OmniPro II controllers and consoles have been tested and Listed by UL for the following applications:
•
UL 985 - Household Fire Warning System Units
•
UL 1023 - Household Burglar Alarm System Units (Grade A)
The 20A00-5 OmniPro II controller has also been tested and Listed by UL for the following applications:
•
UL 365 - Police Station Connected Burglar Alarm Units and Systems (Grade A)
•
UL 609 - Local Burglar Alarm Units and Systems (Grade A)
•
UL 1610 - Central Station Burglar Alarm Units (Grade B, C)
In a UL Listed Installation, failure to operate and program the system as described in this manual is a violation of the Listing
Mark.
See Underwriter's Laboratories Requirements for more information.