Home Automation II User Manual
Owner's manual, Home automation, inc, Control & security system
Table of contents
Document Outline
- INTRODUCTION
- OVERALL DESCRIPTION
- SECURITY SYSTEM OPERATION
- Disarming the Security System and Silencing Alarms
- Arming the Security System
- Using Shortcut Keys
- Quick Arm
- Bypassing Zones
- Restoring Zones
- What To Do When You Come Home
- What Happens When the Alarm is Activated
- Emergency Keys
- Duress Code Entered or Duress Alarm Activated
- Alarm Reset
- Alarm Cancel
- Trouble Indications
- Codes
- Duress Code
- Panic Switches
- Area Arming
- GOTO Area
- Testing Your System
- CONTROL
- Control Commands
- ALC Switch Modules
- X-10 Modules
- Scrolling Through Names
- Controlling Units
- Timed Commands
- Status of a Unit
- Internal Flags
- Controlling Outputs
- All On / Off
- Leviton Scene Control
- Buttons
- Temperature Control
- HAI RC-Series Thermostats
- Programmable Energy Saver Modules (PESMs)
- Temperature Alarms
- Humidity
- Status
- Event Log
- Messages
- TELEPHONE CONTROL
- Telephone Interface
- In-House Phones
- Remote Phones
- Phone Access Denied - Remote Lockout
- Alternate Method
- Main Menu
- 1 - Control
- 2 - Security
- 3 - Button
- 4 - All
- 5 - Temperature
- 6 - Status
- 7 - Events
- 8 - Message
- 9 - Good-Bye
- Panic Button over the Phone (# # # # # #)
- Emergency Dial-Out
- Digital Dialer
- Voice Dialer
- PC Access
- Built-In Ethernet Port
- Controller IP Address, Port Number, and Encryption Key
- OmniPro II Ethernet Connections
- Connecting to Network via PC Access
- Dynamic DNS
- SETUP
- Configuration and Advanced Control Programming (ACP)
- Set Up Codes
- Set Up Time
- Advanced Control Programming (ACP)
- Edit Programs
- Edit Programs When
- Edit Program Command
- Edit Program Condition
- Set Up Dial
- Set Up Arming
- Set up Miscellaneous
- High Security Mode
- Announce Alarms
- Enable Freeze Alarm
- Flash For Alarm
- X-10 House Code 1 Format
- X-10 House Codes 2-16 Format
- House Code 1 X-10 All Off
- House Code 1 X-10 All On
- House Codes 2-16 X-10 All Off
- House Codes 2-16 X-10 All On
- Time Clocks
- Latitude, Longitude, and Time Zone
- Daylight Savings
- Controller IP Address
- Controller Port Number
- Encryption Key
- Set Up Names
- Set Up Voice
- Set Up Address
- UNDERWRITER'S LABORATORIES REQUIREMENTS
- FEDERAL COMMUNICATION COMMISSION NOTICE:
- CANADIAN INDUSTRY CANADA NOTICE
- APPENDIX A - DIAL OUT PLANNER
- APPENDIX B - TEXT DESCRIPTION CHARACTER CODES
- APPENDIX C - VOICE DESCRIPTION CODES