Hitachi 50HDA39 - Manual (Page 22)

22
Setting up y
our
TV
The STARTING SETUP feature appears the first time you turn on
the TV, and helps you select the menu language, specify the AIR/
CABLE setting, and program channels automatically.
IMPORTANT: Make sure that the antenna or cable TV system is
connected.
1. Press TV to select the TV mode.
2. Press POWER
to turn on the TV. The STARTING SETUP
function begins and the language setup menu appears on the
screen. Press
▲ or ▼ to select your desired language, then
press ENTER.
3. Press ▲ or ▼ to select AIR or CABLE, then press ENTER.
4. Press ▲ or ▼ to select START, and then press ENTER, which
starts the AUTO SETUP.
: S E L E C T E N T E R : S E T
L A N G UAG E / L A N G U E / I D I O M A
E N G L I S H
F R A N Ç A I S
E S PA Ñ O L
Starting setup
Notes:
• The position and size of the on-screen menus may change for some program formats (such as 1080i or 720p.)
• If the remote control does not operate your TV, press TV on the remote control and try again.
Note:
To cancel the setup and return to the regular TV screen, press
▲ or ▼ to select CANCEL and press ENTER.
5. When the AUTO SETUP is complete, the regular TV screen appears.
Notes:
• AUTO SETUP of channels may take 15–30 minutes to complete, depending on your regional cable service.
• To cancel the AUTO SETUP and return to the regular TV screen, press EXIT.
Changing the on-screen display language
You can choose from three different languages (English, French
and Spanish) for the on screen displays. Adjustment menus and
messages will appear in the language of your choice.
To select a language:
1. Press TV to select the TV mode.
2. Press MENU, then press or until the SETUP menu
appears.
3. Press ▲ or ▼ to highlight LANGUAGE.
4. Press or to highlight your desired language.
After you have installed the batteries and programmed the remote control, you need to set some preferences on the
TV using the menu system. You can access the menu system with the buttons on the remote control.
• When you make a menu selection, your changes are immediate. You do not have to press MENU or EXIT to
save your changes.
• After one minute, the menu screen will automatically close if you do not make a selection. Your changes will still
be saved.
• When you are finished programming the menus, press EXIT.