beautypg.com

Rear panel connections, Power connection – Hitachi 50HDA39 User Manual

Page 16

background image

16

Fir

st time use

Connecting a PC (personal computer)

This connection allows you to use the TV as a computer monitor.
Before you connect a PC to the TV, adjust the PC's resolution and
refresh rate according to the "Monitor display modes" table at right.
When connecting a PC to the TV, use an analog VGA (15 pin)
computer cable and a PC audio cable.
Set the video input source to PC mode (see “Selecting the video
input source” on page 29 and “Picture/Audio adjustments in the PC
mode” on page 43.)

Monitor display modes

Mode

Resolution

Refresh rate

VGA

640x480

60Hz

WVGA

848x480

60Hz

SVGA

800x600

60Hz

XGA

1024x768

60Hz

WXGA

1280x720

60Hz

WXGA

1280x768

60Hz

WXGA

1360x768

60Hz

TV back panel

Conversion adapter (if necessary)

Notes:
• Some PC models cannot be connected

to this TV.

• An adapter is not needed for computers

with a DOS/V compatible mini D-sub 15-
pin terminal.

• The on-screen displays will have a

different appearance in PC mode than in
TV mode.

• If your PC display output corresponds to

a WVGA or a WXGA resolution as
indicated in the chart above (example:
WXGA 1360 x 768), you must set the
WVGA INPUT or WXGA INPUT to the
ON position in the PC Picture menu in
the TV (see page 43).

Note:
Make sure to insert the plug of each cord
securely.

WARNING:

• Do not connect this unit to power using

any other power cord. This could cause
fire, electric shock, or damage.

• Do not use with a voltage other than the

power voltage displayed. This could cause
fire, electric shock, or damage.

CAUTION:

• When this unit is not used for a long time

(e.g., if you are away on a trip), in the
interest of safety, be sure to unplug it from
the wall outlet.

• Do not plug/unplug the power cord when

your hands are wet. This may cause
electric shock.

• If you need to replace the supplied AC

cord, contact your HITACHI authorized
dealer.

Power connection

To use AC power

1. Connect the AC cord into the TV’s AC inlet.
2. Connect the AC cord into a wall outlet.

AC cord (supplied)

1

To AC inlet

2

AC 120V, 60Hz

Computer

Audio cable

Audio
output

NOTICE OF POSSIBLE ADVERSE
EFFECTS ON PLASMA DISPLAY
Avoid displaying stationary images on
your Plasma display for extended periods
of time. Fixed (non-moving) patterns or
images (including but not limited to PIP/
POP windows, closed captions, video
game patterns, TV station logos, stock
tickers, websites, and special formats that
do not use the entire screen) can become
permanently ingrained in the Plasma
display and cause subtle but permanent
ghost images. This type of damage is
NOT COVERED BY YOUR WARRANTY.

Rear Panel Connections

NOTE: DO NOT CONNECT A
PC USING ONE OF THE
HDMI INPUTS.

ALWAYS use the VGA port provided to connect a PC.