beautypg.com

Setup, On-screen displa y, Magic focus – Hitachi 51G500S User Manual

Page 51

background image

SETUP

51

ON-SCREEN

DISPLA

Y

MAGIC FOCUS

MAGIC FOCUS

Auto Digital Convergence Adjustment
Please turn ON your television for at least 20 minutes before using this feature.

The Magic Focus button on control panel will not work when adjustment mode is set to Manual (see page 52).

Your HITACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper
proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely
aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called “convergence”.

Over a period of time, the picture tubes can drift out of alignment due to normal bumps and vibrations or moving the TV. If you move
your TV, or if, after a time, you notice color rings or halos around objects in the picture, you may want to converge (align) the colors.

Properly converged, the lines appear white, which is actually a combination of the outputs of the three color tubes. The output of the
green tube is stationary. The outputs of the red and blue tubes can be adjusted. When properly aligned, the outputs of all three tubes
should be directly over each other to produce the white lines.

To simplify convergence, HITACHI incorporates a function called MAGIC FOCUS located on the front control panel, which allows the TV
to self-adjust. Press this MAGIC FOCUS button and the convergence self adjustment will start and this process will take approximately
20 seconds. If this button is pressed during this process, no change in picture quality will occur. After this 20 second self-adjust period,
picture quality will be optimum (do not move the TV during self-adjust).

You may also select MAGIC FOCUS TUNE UP from the Setup Menu.

Magic Focus

Tune Up

NOTES: Only a momentary press of the MAGIC FOCUS button is necessary to start AUTO DIGITAL CONVERGENCE. At any

time during this convergence correction process, you may press the MAGIC FOCUS button to exit the MAGIC FOCUS
mode. However, the convergence correction process needs to be completed to SAVE the new corrected convergence
data.

Magic Focus Tune Up

Setup

Move

SEL

Return

Aligns the Red, Green, and Blue

colors to correct for Magnetic

Influences.

Auto
Manual

Setup

Locks

Chan. Manager

Audio

Video

Move

SEL

Sel

Set The Inputs

Set The Clock

Menu Preference

Magic Focus Tune Up

Setup

Move

SEL

Select

Set Black Side Panel

Set Virtual HD

Set The Color System

Adjustment Mode

If you want to adjust now

Start

Aspect

About Your TV

Set Closed Captions

Set Event Timer

MAGIC FOCUS

MENU

SELECT

SELECT

SELECT