Video, On-screen displa y – Hitachi 51G500S User Manual
Page 37
VIDEO
37
ON-SCREEN
DISPLA
Y
Use this function to adjust the percentage of Red, Green and Color according to the user’s preference.
Use TINT to adjust flesh tones so they appear natural.
Color Decoding
Move
SEL
Return
Red
50%
Green
50%
Color
50%
Tint
Reset
RGB
R
G
B
Off
Off
Off
Noise Reduction
Auto Color
Color Decoding
Color Management
Video
Move
SEL
Select
Auto Movie Mode
Color Decoding
Video
The AUTO COLOR function automatically monitors and adjusts the color to maintain constant color levels
even after a program or channel changes. It also maintains natural flesh tones while preserving fidelity of
background colors.
The NOISE REDUCTION function automatically reduces conspicuous noise in the picture without
degrading picture quality. Set NOISE REDUCTION to OFF if the TV experiences picture blocking.
When Noise Reduction is ON, Sharpness function is disabled (grayed out).
The Auto Movie Mode function turns ON or OFF the 3:2 PULLDOWN DETECTION SPECIAL FEATURE.
Theatrical movies are shot on film at 24 frames or still pictures per second, instead of 30 frames or 60 fields
like video. When film is transferred to video for television viewing, the disparity between the two frame rates
must be reconciled. This involves a process known as 3:2 pulldown.
When Auto Movie Mode is turned ON from the VIDEO menu, your Hitachi Projection Television will activate
the circuitry for this special feature to improve video performance when watching film based sources.
Use CURSOR to highlight function.
Press the SELECT button to select from 4 menu items.
Press CURSOR
̇, ̈, ̄, ̆, to highlight and adjust Red, Green, Color and Tint.
Use CURSOR to highlight and select “Reset” to return all settings to default.
NOTE:
When using Component or DVI-HDTV input, Auto Color will not be available (grayed out).
NOTES:
1. When using Progressive Scan Component or DVI-HDTV input (Ex. 480p, 720p and 1080i), Auto Movie Mode will not
be available (grayed out).
2. All Video settings are independent of each other based on it’s input (ANT A/B, Input 1~5).
Auto Color
Noise Reduction
Auto Movie Mode
NOTE:
Color Decoding settings are independently stored in each of the 4 Color Temperature settings.