Hitachi 51G500S - Manual (Page 43)

CHANNEL MANAGER
43
ON-SCREEN
DISPLA
Y
Press CURSOR
̆ or ̄ to review more channels.
Press EXIT to quit the menu.
Move SEL Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Chan. Manager
Channel List
Move SEL Select
Channel Source
Auto Channel Scan Start
Chan. Manager
Ant. A
Channel List
Antenna Cable(1) Cable(2)
SELECT
This function allows you to review which channels are labeled (CH ID), which have been added to Channel Memory
(SCAN), and which are protected by LOCK.
Channel
List
Use this feature after Auto Channel Scan is completed to add (On) or skip (Off) additional channels to
the remote control channel
̆ or ̄ buttons.
Scan
To add (Scan-On) or skip (Scan-Off) additional channels while in Channel List, CURSOR
̇ to highlight the channel number, then
CURSOR
̆ or ̄ to highlight other channels. Once the desired channel is highlighted, CURSOR ̈ to scan column, then CURSOR ̆
or
̄ to select ON or OFF.
Move SEL Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Move SEL ̇ Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Move Set
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Ch# Scan CH ID Lock
2 On --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
[ ]
[ ] [ ]
Move Set
Tune
Chan. Manager Chan. Manager
Chan. Manager Chan. Manager
Channel List Channel List
Channel List Channel List
SEL Return SEL Return
NOTE: Lock feature cannot be selected or set in CHANNEL LIST.