Hitachi 37LD8800TA - Manual (Page 58)

57
PRODUCT SPECIFICATIONS
SPECIFICATION
Panel
Display dimensions
Approx. 32 inches
(698 (H) x 392 (V) mm, diagonal 801mm) Approx. 37 inches
(820 (H) x 461 (V) mm, diagonal 941mm)
Resolution 1366 (H) x 768 (V) pixels 1366 (H) x 768 (V) pixels
Net dimensions
including Stand:
813(W)x663(H)x350(D) mm
excluding Stand:
813(W)x584(H)x114(D) mm
including Optional Stand:
940(W)x736(H)x350(D) mm
excluding Optional Stand:
940(W)x657(H)x119(D) mm
Net weight
including Stand: 27.6kg
excluding Stand: 21.9kg
including Optional Stand: 32.9kg
excluding Optional Stand: 27.2kg
Ambient
conditions Temperature Operating : 5°C to 35°C, Storage : 0°C to 40°C
Relative humidity Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Power supply AC100 - 240V, 50/60Hz
Power consumption/ at standby
150W/<1W (100-220V)
150W/<1.1W (230-240V)
178W/<1W (100-220V)
178W/<1.1W (230-240V)
Audio output speaker total 20W speaker total 20W
(VIDEO input)
Input terminals
AV1•2: composite video input terminal (RCA)
component video input terminal (RCA)
L/R audio input terminal (RCA)
AV3•5: composite video input terminal (RCA)
S video input terminal.
L/R audio input terminal (RCA)
AV4 : composite video input terminal (RCA)
L/R audio input terminal (RCA)
HDMI 1•2 : HDMI input terminal
Audio input terminal (3.5mm Stereo Mini Jack)
Photo Input : Photo Input terminal / SD card slot
Input signals
Composite video: PAL, SECAM, NTSC3.58, NTSC4.43, PAL60
Component video: 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60
Output Signal
OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
OUTPUT (HEADPHONE): L/R audio monitor- output terminal (Mini-pin)
OUTPUT (SUB-WOOFER): Woofer output terminal
(RF input)
Input terminal / Receiving range ANT : 75Ω Unbalanced / 44~870MHz
RF Video System
PAL B, G, H / I / D, K
SECAM B, G / D, K / K1
NTSC-M
(RGB input)
Input terminals
Analog RGB input terminal (D-sub 15-pin)
Audio input terminal (3.5mm Stereo Mini Jack)
Input signals 0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
Sync signals
H/V separate, TTL level [2KΩ]
H/V composite, TTL level [2KΩ]
Sync on green, 0.3 Vp-p [75Ω]
The monitor takes at least 30 minutes to attain the status of optimal picture quality.