Hitachi 37LD8800TA User Manual
Page 27
26
ENGLISH
MENU OPERATION (continued)
Setup Menu (RGB mode) (continued)
Selected Items
Setup hint
Input Level
0.7V
Normally, select [0.7V].
Select [1.0V] only when the whole display becomes too
white.
1.0V
Frequency Display
Off
Select whether indicating the PC signal frequency infor-
mation on Input Signal Screen Display or not.
On
WVGA Type
Off
It allows you to switch display size to [Full] and [Real]. (See
“Size Switching” on
39
for the details.)
This function is available only for WVGA signal.
Refer to “Recommended Signal List” on
59
.
On
WXGA Mode
Off
This function is available only for WXGA signal.
Refer to “Recommended Signal List” on
59
.
1280x768
1366x768
Vertical Filter
Off
Reduce the fl ickers on the screen when set to [On].
On
Frequency Mode
PC
This mode is not available (gray out).
Movie
Information
The items indicated by “
*
” can be automatically stored the setting depending on the signal mode.
The signal mode is identifi ed by the Horizontal/Vertical frequency and the sync. signal polarity, which has almost
same values in all the above items might be regarded as the same signal.
The item “Auto Adjust” cannot be stored. Press
OK
to start auto adjustment as needed.