Hasselblad 949 User Manual

Page 26

Click on the

Batch Scan

button to open the

Batch Scan

window.

If it is not already shown, expand the

Feeder

heading in the

Batch

Scan

window by clicking on the triangle next to the heading.

Set the

Position

field to the slide number you wish to scan. You can

enter the number directly using your keyboard, or select it by clicking

on the up and down buttons next to the field.
In the main FlexColor window, make sure that the auto-focus button

(labeled

) is enabled. You must always enable auto-focus when

scanning slides because mountings can vary in thickness and each

slide may sit slightly differently in its mounting.
Click on

Preview

in the main FlexColor window. The scanner then

advances the Feeder to your selected slide and makes a preview.
Make image settings, such as rotation, crop, corrections and output

size, using the various FlexColor tools as described in the FlexColor

User’s Guide.
Either make a final scan now by clicking on

Scan

in the main

FlexColor window or add the image to the

Manual

list in the

Batch

Scan

window by clicking on the

Add

button there (this enables you

to set up several scans based on their previews and then scan them all

at once later).

1.
2.