Hasselblad 949 User Manual
Page 10
10
A
B
Figure 3: Back panel of the Slide Feeder, showing
the electrical connector (A) and mounting pins (B).
Lift the batch-feeder panel on the front of the Flextight 949 Scanner
and locate the connector (
A
) and two mounting holes (
B
) inside
the scanner, as shown in Figure 4 below. These match the pins and
connector of the Feeder.
Figure 4: Flextight 949 Scanner with the batch-feeder panel open,
showing the electrical connector (A) and mounting holes (B).
9.